Swimming pool water pump blockage

Summer swimming pool the best place, the safety and health of the swimming pool is also increasingly important. Swimming pool water pump blockage, how to deal with it?

Why swimming pool anti-blocking performance more and more attention, there are two main reasons: First, the increase in the cost of swimming pool water treatment. Industrial enterprises are working to reduce the water consumption per unit of product, which makes the sewage solids and fiber content is getting higher and higher. Second, more and more use of sewage pump energy-saving means, is to adjust the speed of the drive, and speed regulation can not guarantee that the pool will not plug the pump.

For frequent impurity impeller pump impeller problems, the initial operation of the swimming pool equipment will be used every block, clearing the night, but the method of clearing. Although this avoids downtime, but often disassemble the pump, resulting in parts and other parts of the pump pump ring increased wear and tear at the same time each time a lot of manpower. To change this situation, in the pump inlet pipe installed at the carbon steel anti-fouling box, and a 45-degree angle. Use a filter inside the box to filter out impurities again to avoid clogging. Team to conduct a monthly anti-pollution 1 to 3 times the clean-up. Swimming pool pump rotor blade shape is divided into two kinds, respectively, vortex-type leaves and cutting blades, the two forms of the most widely used leaves. The swirling impeller does not move in the medium being conveyed, and the medium to be pumped is guided to the pump chamber according to the hydrodynamic principle, and the pumped medium flows from the impeller. Thus, long fibers or solid matter in the pumped liquid medium are also pumped together. The cutting blades, can be a large block of solid material chopped, so no longer plug.

In addition to swimming pool water pump blockage, the prevention work is also important, swimming pool pump routine maintenance measures: regular view and regularly clean the barrier basket. When cleaning, do not knock the barrier basket. If the barrier basket is damaged, it should be replaced in time; check the pump head seal regularly. In case of damage, please replace the time; keep the motor clean and keep the motor air outlet; occasionally, the motor shaft seal will wear, should be replaced; winter should remove the pump head water, clean up the pump inside and outside, Store the pump in a dry and well-ventilated room. High anti-blocking performance Swimming pool water pump can better water treatment, reducing human consumption.