Energy Saving Methods for Agricultural Pumps

Agricultural pumps energy-saving methods generally include the following aspects:
(1) Agricultural pumps ramp loading, reducing elbow. Turn the pump ramp or volute, so that the outlet is facing the pool.

(2) shorten the pipeline. Remove the 1 m steel pipe, 10 hours to save 0.21 kg of diesel.

(3) to expand the water pipe diameter. The 4-meter-long 10 cm water hose replaced 15 cm tube, 10 hours to save diesel 0.5 kg.

(4) in the water can be kept clean, you can remove the filter.

(5) Agricultural pumps for the ring, adjust the axial clearance. To prevent impeller ring and the axial gap is not appropriate, should be used according to the pump factory instructions to adjust.

(6) the timely elimination of pipeline blockage. Foreign matter left in the inlet pipe, impeller or diversion shell flow path, will reduce the amount of water.

(7) to prevent the pump into the air. Pump into the air, the water will be significantly reduced, should check the sealing parts of the maintenance.

(8) the use of coupling direct drive instead of flat belt, can improve the transmission efficiency.

(9) to eliminate the “anti-aircraft gun” type outlet. This outlet increases energy consumption.